Overview

The Draytek Vigor 2930VS is a high-performance dual-WAN firewall. The two dedicated ethernet WAN ports can provide load balancing, WAN failover or bandwidth aggregation (increasing total bandwidth onto the Internet). The Draytek Vigor 2930VS also comes with SIP-Compliant VoIP (Voice-over-IP) and ISDN support. High Speed total WAN througput of up to 70Mb/s is available, and IPSec VPN throughput of up to 40Mb/s. Extensive QoS support and comprehensive Web Content filtering features help you make the most efficient use of your bandwidth.

The Draytek Vigor 2930VS is in an all-new DrayTek housing design with all LEDs and sockets provided conveniently on the front. This makes desk usage, wall mouting or rack-mousing (optional bracket required) all equally covenient.

VoIP

Voice-over-IP Features

The Voice-over-IP (VoIP) facilities on the Draytek Vigor 2930VS are extensive. Standard SIP compliance, with up to 12 simultaneous registrars (e.g. DrayTEL etc.) is supported, plus multiple codec support and many supplemental services enabling you to make thorough use of your Internet connection for Voice calls. Short codes (speed dials) and VoIP LCR ('Least Cost Routing') are also supported./p>

Draytek Vigor 2930VS Schematic From left : Two analogue VoIP ports, two ISDN Sockets (One S0, one switchable S0/NT), dual Ethernet WAN ports and four LAN Ethernet ports.

ISDN

ISDN Operation

The Draytek Vigor 2930VS has two ISDN ports. Ports 1 and 2 can both be used as ISDN host ports, i.e. you can plug in any digital ISDN device such as an ISDN telephone or ISDN analogue adaptor (to convert to analogue phones). This is known as 'S0' mode. ISDN Port 2 can also be configured to be an ISDN Line Port ('NT mode') whereby you connect it to a BT ISDN line (or BT Highway). This ISDN access can be used for backup Internet access or it can be used as your primary/only Internet connectivity. See the diagram later on this page to understand the topology more clearly.

Draytek Vigor 2930VS Schematic From left : Two analogue VoIP ports, two ISDN Sockets (One S0, one switchable S0/NT), dual Ethernet WAN ports and four LAN Ethernet ports.

Specification

Draytek Vigor 2930VS Series Specification

• Physical Interfaces:
  • LAN: 4-port 10/100 Base-TX Switch
  • WAN: 2-port 10/100 Base-TX Ethernet
  • VoIP: 2-port FXS Phone Ports
  • ISDN: 2-Ports. One fixed S0, one configurable NT / TE mode
• Dual-WAN Ports:
  • 10/100Base-T Ethernet
  • Outbound Policy-Based Load-Balance
  • WAN Connection Fail-over
  • BoD (Bandwidth on Demand)
• VoIP Features:
  • Protocols: SIP, RTP / RTCP
  • 12 SIP Registrar Accounts (for up to 12 VoIP providers)
  • G.168 Line Echo-cancellation
  • Automatic Gain Control
  • Jitter Buffer ( 125ms )
  • Voice Codecs:
    • G.711 A / µ Law
    • G.723.1
    • G.726
    • G.729 A / B
  • VAD / CNG
  • Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
  • DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
  • FAX / Modem Support G.711 Pass-through
  • T.38 for FAX
  • Supplemental Services:
    • Caller ID
    • Call Hold / Retrieve
    • Call Waiting
    • Call Waiting with Caller ID
    • Call Transfer
    • Call Forwarding ( Always , On Busy and On No Answer )
    • DND (Do not Disturb)
    • Call Barring ( Incoming / Outgoing )
    • MWI ( Message Waiting Indicator ) ( RFC-3842 )
    • Hotline (Dial preset number when handset lifted)
• ISDN Features:
  • RJ-45 S/T Interfaces
  • ISDN Loop-Through
  • ISDN On-net / Off-net
  • Euro ISDN Compatible
  • Automatic ISDN Backup for Internet Access
  • Support 64 / 128Kbps ( Multilink-PPP)
  • BoD ( Bandwidth on Demand )
  • Remote Dial-In / LAN-to-LAN Connection
  • Remote Activation (Dial back on ISDN Caller ID recognition)
  • ISDN Port Passthrough During Power Cut
• WAN Protocols:
  • DHCP Client
  • Static IP
  • PPPoE
  • PPTP
  • L2TP *
  • BPA
• Firewall & Security Features:
  • CSM (Content Security Management):
    • URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
    • Surfcontrol Support - Block Web sites by category (subject to subscription)
    • Prevent accessing of web sites by using their direct IP address (thus URLs only)
    • Blocking automatic download of Java applets and ActiveX controls
    • Blocking of web site cookies
    • Block http downloads of file types :
      • Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
      • Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
      • Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
    • Time Schedules for enabling/disabling the restrictions
    • Block P2P (Peer-to-Peer) file sharing programs (e.g. Kazza, WinMX etc. )
    • Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
  • Multi-NAT, DMZ Host
  • Port Redirection and Open Port Configuration
  • Policy-Based Firewall
  • MAC Address Filter
  • SPI ( Stateful Packet Inspection )
  • DoS / DDoS Protection
  • IP Address Anti-spoofing
  • E-Mail Alert and Logging via Syslog
  • Bind IP to MAC Address
• VPN Support:
  • Up to 50 Simultaneous VPN Tunnels
  • Protocols : PPTP, IPSec, L2TP, L2TP over IPSec
  • Encryption : MPPE and Hardware-Based AES / DES / 3DES
  • Authentication : Hardware-Based MD5 , SHA-1
  • IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )
  • PFS (Perfect Forward Secrecy)
  • IKE Phase 1 Agressive/Standard Modes & Phase 2 Selectable lifetimes
  • LAN-to-LAN (Dial-in & Dial-Out), Teleworker-to-LAN
  • DHCP over IPSec
  • NAT-Traversal (NAT-T)
  • Dead Peer Detection (DPD)
  • VPN Pass-Through
• Bandwidth Management:
  • QoS
  • Guaranteed Bandwidth for VoIP
  • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
  • DiffServ Code Point Classifying
  • 4-level Priority for each Direction (Inbound / Outbound)
  • Bandwidth Borrowed
  • Temporary (5 minute) Quick Blocking of any LAN Client
  • Bandwidth / Session Limitation
• Network/Router Management:
  • Web-Based User Interface (HTTP / HTTPS)
  • CLI ( Command Line Interface ) / Telnet / SSH*
  • Administration Access Control
  • Configuration Backup / Restore
  • Built-in Diagnostic Function
  • Firmware Upgrade via TFTP / FTP
  • Logging via Syslog
  • SNMP Management with MIB-II
• Network Features:
  • DHCP Client / Relay / Server
  • Dynamic DNS
  • NTP Client (Syncrhonise Router Time)
  • Call Scheduling (Enable/Trigger Internet Access by Time)
  • RADIUS Client
  • DNS Cache / Proxy
  • Microsoft™ UPnP
  • Port-Based VLAN (Ethernet LAN ports exclusive/inclusive groups)
Routing Protocols:
• Static Routing
• RIP V2
• Operating Requirements:
  • Rack Mountable (Optional mount bracket required)
  • Temperature Operating : 0°C ~ 45°C
  • Storage : -25°C ~ 70°C
  • Humidity 10% ~ 90% ( non-condensing )
  • Power Consumption: 18 Watt Max.
  • Dimensions: L240.96 * W165.07 * H43.96 ( mm )
  • Operating Power: DC 15V (via external PSU, supplied)
  • Warrantyu : 2 Years Manufacturer's RTB included
  • Power Requirements : 220-240VAC

Accessories

Rack Mounting Kit

The RM1 Rackmount Bracket enabled you to fit any Draytek Vigor 2930VS series router into a standard 19" rack or cabinet. The bracket takes up one rack slot (1U). The front mounted sockets remain fully accessible. For wireless models, we then recommend extension aerials (or aerial extensions).