Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Flexible, Stackable, High Speed Switching!
The Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
delivers maximum throughput and flexibility where you need it — to high-speed, high-density workgroups at the edge of the network, in the backbone of growing networks or for bandwidth-thirsty file and application servers. The
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
fully-managed switches deliver 48 ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity.
The Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements. For high-density fiber installations, the GSM7328FS delivers 48 hot-swappable SFP Gigabit interfaces for fiber connectivity and 4 combo ports of auto-sensing 10/100/1000 Mbps interfaces for copper connectivity. The Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S has
four high-speed, module bays offering modular expansion for 10 Gigabit Ethernet or 24 Gigabit Stacking connectivity. The
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports.
The Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
full suite of Layer 3 switching functionality ensures reliable routing between VLANs and network segmentation where and when you need it, at no additional cost. By configuring the
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
into a stack of up to 8 units across a 48 Gbps bi-directional ring, a high-density, single IP-addressable switch can be built.
Robust security features
of the Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
include IEEE 802.1x port-based authentication and access control lists, ensuring that only authorized users can access your network. Secure management of the
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secured Shell (SSH) for command-line sessions or with SNMP v3 for network management software. For workgroup deployments in cost-sensitive organizations that require Layer 3 switching, additional Gigabit capacity, high-value price point, flexibility of stacking, and reduced maintenance requirements,
the Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S delivers the ideal access-edge solution.
With the
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
high-value price point, flexible design, and reduced maintenance requirements,
the Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S
yield a high return on investment, and are ideal for delivering highly reliable, converged voice, video, and data services over a single network infrastructure.
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Powerful
In desktop switching environments, wire-speed performance with full QoS control for all 10/100/1000 interfaces is critical. The
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
4 high-speed 10G/24G module bays provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidththirsty file servers, or aggregating critical data to the core of your network.
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Easy to Use
Simplify and reduce IT staff workload and mean time-to-repair with
the Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
intuitive, GUI-based device configuration, and an industry-standard command-line interface (CLI). The
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
EZ-Config tool simplifies initial configuration steps to streamline the out-of-box set-up. For easy tracking of port usage, use the
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
text-based port description to label how ports are used.
The Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S's
stacking capabilities allow you to build a single-IP manageable device with up to eight switches utilizing ultra-high-speed 48 Gbps across intelligent bi-directional redundant stacking links.
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Physical Interfaces:
- RJ-45 Connectors for 10BASE-T, 100BASETX, and 1000BASE-T (Auto Uplink™ on all ports): 48 ports
- Small form-factor pluggable (SFP) modules for fiber Gigabit Ethernet interfaces: 4 slots
- (4) 10 Gigabit Ethernet/24G Stacking Module Bays
- RS-232 Console Port
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Layer 2 Services:
- IEEE 802.1Q Static VLAN (Up to 4k)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1v Protocol VLAN & Port VLAN
- IEEE 802.1 Q-inQ
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.1s Multiple Spanning Tree
- IEEE 802.3ad Link Aggregation (LACP) up to 48 trunks
- IEEE 802.1x Port Access Authentication
- IGMP v1, v2 Snooping Support
- Network Storm Protection including Broadcast, multicast and unicast traffic
- Static multicast filtering
- Ingress Rate Limit in 1Kbps increments
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Layer 3 Services:
- VLAN routing
- Port routing
- RIP v1/v2 (RFC 1057, 2453)
- OSPF v2 (RFC 1583, 2328)
- OSPF Equal Cost Multipath (ECMP)
- VRRP (RFC 2338, 2787) 64 instances
- ACLs – 1,024 Global
- DiffServ QOS (RFC 2998)
- DNS Caching
- DHCP/Bootp Relay -primary and backup (RFC3046, option 82)
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Switch Management Specifications:
- SNMP v1, v2c, v3 with multiple IP addresses
- RFC 1157, 1901-1910, 2574, 2575
- RFC 768 UDP
- UDP Relay
- RFC 854-859 Telnet
- RFC 951 BootP
- RFC 1213 MIB II
- RFC 1757 RMON groups 1,2,3, and 9
- RFC 1215 SNMP Traps
- RFC 1493 Bridge MIB
- RFC 1643 Ethernet Interface MIB
- RFC 1534 DHCP and BootP Interoperation
- RFC 2131, 2132 DHCP and BootP
- RFC 2865 RADIUS (both switch and management access)
- RFC 2866 RADIUS Accounting
- Private Enterprise MIB
- Port Mirroring Support
- RFC 2236 IGMP v2
- IGMP Querier
- RFC 2030 Simple Network Time Protocol (SNTP)
- RFC 1027 Proxy ARP
- SYSLOG
- Firmware upgrade via TFTP or HTTP
- Port Description
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Performance Specifications:
- Forwarding modes: Store-and-forward
- Bandwidth: 196 Gbps (non-blocking)
- Switch latency: < 6 us for 64-byte frames (10G to 10G) < 2 us for 64-byte frames (10G to 10G)
- System memory: 256 MB
- Packet buffer memory: 334 KB embedded memory per port
- Code Storage (Flash): 32 MB
- Address database size: 8K media access control (MAC) addresses
- Number of VLANs: 512 (1-4096)
- Number of trunks: 48
- Number of Queues: 8
- Number of routes: 512
- Jumbo frame support: up to 9K packet size
- Acoustic noise: 52.8 dB
- Heat Dissipation: 375.54 BTU/hr
- Mean Time Between Failure (MTBF): 117,747 hours (~ 13.4 years)
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - User Interfaces:
- Command Line Interface (CLI) via console port
- Web-based management via embedded HTTP server protected with Secured Sockets Layer
- (SSLv3) or Transport Layer Security (TLS v1)
- Telnet remote login (5 sessions) securable with Secured Shell (SSH v1.5, v2)
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - LEDs:
- Per port: Speed, Link, Activity
- Per device: Power, Fan Status, Stack ID, RPS, Master
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Network Standards Compatibility:
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3u 100BASE-FX*
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x Flow Control
- IEEE 802.3ae 10000BASE-X
*Tested with Fiberxon SFP Modules
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Physical Specifications: - Dimensions (w x d x h): 440 x 385 x 43 mm (17.32 x 15.16 x 1.7 in)
- Weight: 5.4kg (12lbs)
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Environmental Specifications: - Operating temperature: 0° to 40° C (32 to 104° F)
- Storage temperature: -20° to 70° C (-4 to 158° F)
- Operating humidity: 90% maximum relative humidity, noncondensing
- Storage humidity: 95% maximum relative humidity, noncondensing
- Operating altitude: 3,000 m (10,000 ft) maximum
- Storage altitude: 3,000 m (10,000 ft) maximum
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Electrical Specifications: - Power Consumption: 80 W maximum
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Electromagnetic Emissions: - CE mark
- EN55022 Class A - Emissions
- EN55024 - Immunity
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Electromagnetic Safety: - CE mark
- EN60950-1
- UL/cUL 60950-1
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Warranty: - NETGEAR Lifetime Warranty†
Netgear ProSafe 48 Port L3 Managed Gigabit Switch GSM7352S - Package Contents: - ProSafe Gigabit L3 Managed Switch
- Null modem cable
- Rubber footpads
- Power cable
- Rack-mount kit
- Installation Guide
- Resource CD-ROM
- Warranty/Support information card
†Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is limited lifetime.
t |
