CAT-5E Ethernet Cables

Fibre Optic Cables

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Flexible, Stackable, Fast Ethernet Switching!

The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S deliver maximum throughput and flexibility where you need it — to high-density workgroups at the edge of the network, or in the backbone of small networks. The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S are managed 48-port switches with auto-sensing 10/100 ports and four 10/100/1000 ports. The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S has fiber connectivity through four hot-swappable small form-factor pluggable (SFP) Gigabit interfaces. The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches.

The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's Dynamic Layer 3 switching ensures reliable routing between VLANs and network segmentation where and when you need it, at no additional cost. Plus, the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's convenient front-panel stacking via standard Gigabit Ethernet interfaces provides expandability to meet your growing network’s needs.

Robust security features of the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S include IEEE 802.1x port-based authentication and access control lists, ensuring that only authorized users can access your network. Secure management of the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secure Shell (SSH) for command-line sessions. Additionally, multiple Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S units can be securely managed via SNMPv3 with NETGEAR’s ProSafe Network Management Software NMS100. For workgroup deployments in cost-sensitive organizations that require layer 3 switching, the flexibility of stacking and additional Gigabit capability, Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S deliver the ideal access-edge solution.

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Powerful

In desktop switching environments, wire-speed performance with full QoS control for all 10/100 interfaces is critical. The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's 4 Gigabit Ethernet combo interfaces provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network.

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Easy-to-use

Simplify and reduce IT staff workload and mean time to repair with the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's intuitive, GUI-based device configuration, and an industry-standard command-line interface (CLI). The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's new front-panel stacking capabilities allow you to build a single-IP manageable device with up to eight switches utilizing standard copper or fiber Gigabit Ethernet interfaces and cables. The Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's dynamic RIPv1/v2 standards based routing protocols ensure ease of setup, and eliminate the need to maintain static routing tables, reducing ongoing maintenance costs.

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Outstanding Value

With the Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S's high-value price point, flexible design, and reduced maintenance requirements, Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S yield a high return on investment, and are ideal for delivering highly reliable, converged voice, video, and data services over a single network infrastructure.

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Network Protocol and Standards Compatibility

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3z 1000BASE-SX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3x flow control

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Layer 2 Services

• IEEE 802.1Q static VLAN (up to 512)
• IEEE 802.1p Class of Service (CoS)
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1v protocol VLAN & port VLAN
• IEEE 802.1 QinQ
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1s Multiple Spanning Tree Protocol
• IEEE 802.3ad link aggregation (LACP) up to 48 trunks
• IEEE 802.1x port access authentication
• IGMP v1, v2 snooping support
• Network storm protection, including broadcast, multicast and unicast traffic
• Static multicast filtering
• Ingress rate limit in 1Kbps increments

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Layer 3 Services

• VLAN routing
• Port-based routing
• RIP v1/v2 (RFC 1057, 2453)
• ACLs - 1,024 global
• DiffServ QoS (RFC 2998)
• DNS caching
• DHCP/BOOTP relay - primary and backup (RFC3046, option 82)

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Switch Management Specifications

• SNMP v1, v2c, v3 with multiple IP addresses
• RFC 1157, 1901-1910, 2574, 2575
• RFC 768 UDP
• UDP relay
• RFC 854-859 telnet
• RFC 951 BOOTP
• RFC 1027 Proxy ARP
• RFC 1213 MIB II
• RFC 1757 RMON groups 1,2,3, and 9
• RFC 1215 SNMP traps
• RFC 1493 bridge MIB
• RFC 1643 Ethernet interface MIB
• RFC 1534 DHCP and BOOTP interoperation
• RFC 2030 Simple Network Time Protocol (SNTP)
• RFC 2131, 2132 DHCP and BOOTP
• RFC 2236 IGMP v2
• RFC 2865 RADIUS (both switch and management access)
• RFC 2866 RADIUS accounting
• RFC 3376 - IGMP v3
• Private enterprise MIB
• Port mirroring support (many to one)
• IGMP querier
• SYSLOG
• Firmware upgrade via TFTP or HTTP
• Port description

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - User Interfaces

• Command-line interface (CLI) via console port
• Web-based management via embedded HTTP server protected with Secured Sockets Layer (SSLv3) or Transport Layer Security (TLS v1)
• Telnet remote login (5 sessions) securable with Secure Shell (SSH v1.5, v2)

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - LEDs

• Per port: Speed, link, activity
• Per device: Power, fan status, stack ID, master

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Physical Interfaces

• 48 RJ-45 connectors for 10BASE-T, 100BASE-TX (Auto Uplink and auto negotiate on all ports)
• 4 1000Base-T with optional SFP connectors for fiber connection
• RS-232 console port

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Performance Specifications

• Forwarding modes: Store and forward
• Bandwidth: 17.6 Gbps (non-blocking)
• Switch latency: Less than 80 microseconds for 64-byte frames
• System memory: 128 MB
• Packet buffer memory: 32 MB
• Code storage (Flash): 16 MB
• Address database size: 16,384 media access control (MAC) addresses
• Number of VLANs: 512 (1-4096)
• Number of trunks: 6
• Number of queues: 8
• Number of routes: 128
• Jumbo frame support: up to 9K packet size

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Electrical Specifications

• Power consumption: 36W
• 100-240VAC/50-60Hz universal input

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Physical Specifications

• Dimensions (w x d x h): 440 x 257 x 43 mm (17.32 x 10.1 x 1.7 in)
• Weight: 3.2 kg (7.0 lb)
• Acoustic noise: (ANSI-S10.12) 37.6 dB
• Heat dissipation: 160 Btu/hr
• Mean time between failure (MTBF): 117,747 hours (~13.4 years)

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Environmental Specifications

• Operating temperature: 0° to 50° C (32° to 13° F)
• Storage temperature: -20° to 70° C (-4° to 158° F)
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating altitude: 10,000 ft (3,000 m) maximum
• Storage altitude: 10,000 ft (3,000 m) maximum

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Electromagnetic Emissions

• CE mark, commercial
• FCC Part 15 Class A
• VCCI Class A
• EN 55022 (CISPR 22), Class A
• C-Tick

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Electromagnetic Immunity

• EN 50082-1, EN 55024

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Safety

• CE mark, commercial
• CSA certified (CSA 22.2 #950)
• UL listed (UL 1950)
• CUL IEC 950
• EN 60950

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Warranty

• NETGEAR Lifetime Warranty†

Netgear ProSafe 48 Port L3 Managed Stackable Fast Switch with 4 Gigabit Ports FSM7352S - Package Contents

• FSM7328S Managed Switch
• Power cable
• Null modem cable
• Rubber footpads for tabletop installation
• Rack-mount kit
• Installation guide
• Resource CD-ROM with user manual
• ProSafe NMS100 30-Day Trial CD-ROM
• Warranty/support information card

†Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 3 years.